"The Linux Gazette...making Linux just a little more fun!"


(?) The Answer Guy (!)


By James T. Dennis, [email protected]
LinuxCare, http://www.linuxcare.com/


(?) Reading CD Discs on an IDE CDR Drive

From balou nguyen on Wed, 14 Jul 1999

I recompiled my kernal 2.2.9-19 to use my cd-writer as per the cd-writer howto. I had to enable scsi-emulation in the block devices, and enable scsi support for cdrom in the scsi. Now xcdroast works great, but I can't mount my cd, and I can't use cdplayer.

I can still play the cd if I go through xcdroast though.

Commands I have tried include:


mount -t iso9660 /dev/sg0 /mnt/cdrom
(!) I would never expect that to work. The sg driver is for "generic access" to a SCSI device. It doesn't provide the semantics for block read/write (like a hard disk or other filesystem driver)
(?)
insmod ide-cd
mount -t iso9660 /dev/cdrom /mnt/cdrom
(!) What are the major and minor numbers and type of the device node to which your /dev/cdrom points? If /dev/cdrom is not a symlink, make it so.

(?) or


mount -t iso9660 /dev/hdc /mnt/cdrom
(!) Is this drive the master on the secondary IDE channel? If not, than this is your problem. Try /dev/hdb (slave on primary channel) or /dev/hdd (slave on secondary channel).

(?) I've also tried the other various recommendations in the howto without success...

(!) You may have me stumped. I haven't purchased an IDE CDR or CDRW yet. So I don't have first hand experience with this. (I've been meaning to get a CDRW or a DVD RAM drive soon. Maybe I'll know better in a month or so).


Copyright © 1999, James T. Dennis
Published in The Linux Gazette Issue 44 August 1999
HTML transformation by Heather Stern of Starshine Techinical Services, http://www.starshine.org/


[ Answer Guy Index ] 1 4 7 9
11 12 14 17
18 19 20 21 24 25 26
28 29 30 31 32 33 34
35 36 37 38 39 40 41
42 43 44 45 46 47 48


[ Table Of Contents ] [ Front Page ] [ Previous Section ] [ Next Section ]