[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

new mini-howto - 'bootstrap' debian install with redhat/tomsrtbt/etc



According to the docs, this list is the first step in creating a howto, so
here goes..

I am working on a mini-howto on installing debian using redhat (more
drivers at boot) or tomsrtbt as a bootstrap.  The premise is you have a
tomsrtbt or redhat install or rescue kit that has all the drivers you need
(or at least hd/cd/network) and you want to install debian.

Basic steps are:
Install debian onto a spare partition of another machine, but stop at the
first reboot.
Tar that partition up and save it off to the network (or a cd)
Boot the working disks/cdrom on the problem machine and partition it
out. 
Download and untar the 'base kit' created earlier.
Edit /etc/fstab and such to match new system, rerun lilo. 
Reboot.

I'm figuring when all is said and done, it'll be about 15 pages.

---
   _.-=<Disconnect>=-._
|     [email protected]    | And Remember...
\[email protected]/ He who controls Purple controls the Universe..
 PGP Key given on Request  Or at least the Purple parts!

-----BEGIN GEEK CODE BLOCK-----
Version: 3.1 [www.ebb.org/ungeek]
GIT/CC d--(-)@ s++:-- a-->? C++++$ UBSL++++$ P+>+++ L++++>+++++>---@ 
E- W+++ N+@ o+>$ K? w--->+++++ O M+ V-- PS+() PE Y+@ PGP++() t 5--- X           
R tv+@ b++++>$ DI++++ D++(+++) G++ e* h()* r++ y++    
------END GEEK CODE BLOCK------


--  
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]