Next Previous Contents

3. Setup on the server

3.1 Compiling the kernels

On the server side, if you don't plan to use the old, user-mode NFS daemon, you'll need to compile NFS server support into the kernel (``NFS server support,'' a.k.a. knfsd or CONFIG_NFSD). If you plan to use the older RARP protocol to assign the client an IP address, RARP support in the kernel of the server is probably a good idea. (You must have it if you will boot via RARP without kernel parameters.) On the other hand, it doesn't help you if the client isn't on the same subnet as the server.

The kernel for the workstation needs the following settings, as a minimum:

Where there is an option to compile something in as a module, do not do so; modules only work after the kernel is booted, and these things are needed during boot.

For dynamically assigned IP numbers, you'll also need to select one or more of these kernel options:

If the workstation will be booted without kernel parameters, you need also to set the root device to 0:255. Do this by creating a dummy device file with mknod /dev/nfsroot b 0 255. After having created such a device file, you can set root device of the kernel image with rdev <kernel-image> /dev/nfsroot. [NOTE: Modern kernels recognize root=/dev/nfs as a command-line argument; for consistency and/or compatibility, it may be better to use /dev/nfs as the device name instead of /dev/nfsroot.]

3.2 Creation of the root filesystem

Copying the filesystem

Warning: while these instruction might work for you, they are by no means sensefull in a production environment. For a better way to set up a root filesystem for the clients, see the NFS-Root-Client mini-HOWTO by Ofer Maor <[email protected]>.

After having decided where to place the root tree, create it with (e.g.) mkdir -p <directory> and tar cClf / - | tar xpCf <directory> -.

If you boot your kernel without LILO, then the rootdir has to be /tftpboot/<IP-address>. If you don't like it, you can change it in the top Makefile in the kernel sources, look for a line like: NFS_ROOT = -DNFS_ROOT="\"/tftpboot/%s\"" If you change this, you have to recompile the kernel.

Changes to the root filesystem

Now trim the unneeded files, and check the /etc/rc.d scripts. Some important points:

Exporting the filesystem

Export the root dir to the workstation. The basic idea is to edit /etc/exports to include a line similar to one of the following:

For example, a DHCP client receiving an IP address on a class C subnet would need an exports entry similar to this:

The no_root_squash parameter allows the superuser (root) to be treated as such by the NFS server; otherwise root will be remapped to nobody and will generally be unable to do anything useful with the filesystem. The no_all_squash parameter is similar but applies to non-root users. See the exports(5) man page for details.

You will have to notify the NFS server after making any changes to the exports file. Under Red Hat this can easily be done by typing /etc/rc.d/init.d/nfs stop; /etc/rc.d/init.d/nfs start. On other systems, a simple /etc/rc.d/init.d/nfs restart or even exportfs -a may suffice, while on older machines running the user-mode NFS daemon you may actually need to killall -HUP rpc.mountd; killall -HUP rpc.nfsd. (Do not killall -HUP rpc.portmap, however!)

You may also need to edit /etc/hosts.allow and/or /etc/hosts.deny if tcp_wrappers are installed. In particular, if the remote system (client) gets RPC: connection refused errors, /etc/hosts.deny probably contains portmap: ALL or ALL: ALL. To enable the client to use the server's portmapper, add a corresponding line to /etc/hosts.allow:

portmap: <client-IP-number>
portmap: <2nd-client-IP-number>
portmap: <client-IP-network>/<client-IP-netmask>

There is no need to restart anything in this case. You can check by running rpcinfo -p on the NFS server and rpcinfo -p NFS-server on a Linux client within the allowed range; the RPC services listed by both should match.

In case of problems, check /var/log/messages and /var/log/syslog for errors (for example, run tail -f /var/log/messages /var/log/syslog and then try booting the client), and check your man pages (exports, exportfs, portmap, etc.). As a last resort, a reboot of the NFS server may help, but that's a borderline Microsoftism...

RARP setup

Set up the RARP somewhere on the net. If you boot without a nfsroot parameter, the RARP server has to be the NFS server. Usually this will be the NFS server. To do this, you will need to run a kernel with RARP support.

To do this, execute (and install it somewhere in /etc/rc.d of the server!):

/sbin/rarp -s <ip-addr> <hardware-addr>

where

ip-addr

is the IP address of the workstation, and

hardware-addr

is the ethernet address of the network card of the workstation.

example: /sbin/rarp -s 131.131.90.200 00:00:c0:47:10:12

You can also use a symbolic name instead of the IP address, as long the server is able to find out the IP address. (/etc/hosts or DNS lookups)

BOOTP setup

For BOOTP setup you need to edit /etc/bootptab. Please consult the bootpd(8) and bootptab(5) man pages.

DHCP setup

There is no need for the DHCP server to be the same as the NFS server, and in most cases, a DHCP server will already be set up. If one is not, however, consult the DHCP mini-HOWTO for further help.

Finding out hardware addresses

I don't know the hardware address! How can I find it out?


Next Previous Contents